References

Materials – Interior

333 sources in the library on materials – interior. Each one says what the document covers and what it is good for. Name a source to see which document it is and where to read it. One at a time. Page 9 of 9.

1. supplier figure RN-7M3LGX

   Wickes

   the retail price Wickes publishes for a fire resistant three section timber loft ladder, which is the top of the supply range the cost book records for loft ladders and hatches

   Name this source
2. supplier figure RN-FFVNIQ

   Wickes

   Wickes plasterboard category listing 2,400 × 1,200 mm Knauf boards: standard 12.5 mm and 9.5 mm at £13.40, Fire Panel £21, Moisture Panel £22, Sound Panel £26 and a 27 mm XPS laminate at £58.

   Name this source
3. supplier figure RN-WAUIX8

   Wickes Building Supplies Ltd

   the retail price Wickes Building Supplies Ltd publishes for Marshalls Fairstone Sawn Versuro Smooth Caramel Cream Walling Stone 3m2, which is the supply figure the cost book records for this item

   Name this source
4. supplier figure RN-9ATQ7H

   Wickes Building Supplies Ltd

   the retail price Wickes Building Supplies Ltd publishes for Terms & Conditions, which is the supply figure the cost book records for this item

   Name this source
5. supplier figure RN-4Z7RE8

   Zinsser UK

   Manufacturer data for a scrubbable interior matt paint. Coverage is 10 to 12 m2 per litre. Scrub resistance is Class 1 wet scrub to ISO 11998, the top classification and the figure worth quoting against a standard vinyl matt at Class 2. Reaction to fire is Class B-s1, d0 tested to BS EN 13501-1:2018 on a bare non-combustible substrate, which is the qualification that matters because the classification does not carry over onto a combustible lining. It suits new or previously painted wallboard and plaster ceilings and walls, and is available in Brilliant White plus tint bases matched to NCS, RAL or BS 4800 colours.

   Name this source
6. supplier figure RN-C4UZFY

   Zinsser UK

   Manufacturer data for a water based all surface exterior paint. Coverage is 12 m2 per litre and it is recoatable in 1 hour. It is designed for long term decoration of timber, metal, masonry, plastic, concrete and cladding, forming a vapour permeable water shedding coating, which is the property that matters on a solid wall that needs to breathe. The matt finish will bridge gaps in the painted surface up to 0.5mm wide. Coloured finishes are stated not to darken when wet, unlike many other matt exterior paints. The dried film is a treated article containing the biocides 2-octyl-2H-isothiazol-3-one at 0.06 per cent, Diuron at 0.15 per cent and Zinc Pyrithione at 0.06 per cent by weight.

   Name this source
7. supplier figure RN-2CGB9O

   Zinsser UK

   Manufacturer data for the water based version of Zinsser's stain blocking primer. Coverage is 9 m2 per litre, lower than the 12.5 m2 per litre of the original shellac based B-I-N, which is the quantity difference to allow for when substituting the low odour water based version on an interior job.

   Name this source
8. supplier figure RN-PXOAO7

   Zinsser UK

   Manufacturer data for B-I-N shellac based primer, the standard answer to a water stain or nicotine bleeding through emulsion. Coverage is 12.5 m2 per litre. It is touch dry in 15 minutes and recoatable in 45 minutes, with a full cure of 1 to 3 days, which is why it is used when a room has to be finished the same day. Shelf life is 3 years unopened. Because it is shellac and alcohol based, clean-up is with denatured alcohol or ammoniated detergent, and tools are washed in 1 part ammonia to 3 parts water immediately after use; dried primer needs an overnight soak and a stiff brush. It applies by brush, roller, pad, airless or conventional spray.

   Name this source
9. supplier figure RN-9ZRQEY

   Zinsser UK

   Manufacturer data for a water based bond coat primer sealer. It dries in 30 minutes with a 1 hour recoat time. It primes and seals a wide range of interior and exterior surfaces and gives adhesion to hard to stick surfaces without sanding. It is rust inhibitive over clean ferrous metal such as iron and steel, resists flash rusting in the wet state and gives rust resistance for the life of the coating, so it suits iron railings, steel doors, metal panels, ductwork and galvanised gutters. It contains a biocide protecting the dried coating against fungal degradation on both the underside and the surface of the primer film, which is why it is specified in bathrooms and laundry rooms. The white finish can be tinted towards the topcoat colour.

   Name this source
10. supplier figure RN-0R8VOP

    Zinsser UK

    Manufacturer data for a solvent based stain blocking primer sealer. Coverage is 9.8 m2 per litre. It is touch dry in 30 minutes and recoatable in 2 hours, with a full cure of 4 to 7 days. Compared with the same maker's shellac based B-I-N at 12.5 m2 per litre and a 45 minute recoat, Cover Stain covers less ground per litre and takes longer to recoat, which is the practical difference between the two stain blockers when planning a day's work.

    Name this source
11. supplier figure RN-FM955D

    Zinsser UK

    Manufacturer data for a penetrating sealer used on porous and damaged surfaces such as torn plasterboard paper and residual wallpaper paste. Coverage is 5 to 10 m2 per litre, the wide range reflecting how much the substrate drinks. It is touch dry in 30 minutes with a recoat time of 3 hours and a full cure in 3 days. The 3 hour recoat is the practical constraint on stripping wallpaper and painting the same day.

    Name this source
12. supplier figure RN-6M3MIA

    Zinsser UK

    Manufacturer data for a flexible binding primer used over cracking, chalking and peeling paint. Coverage is 7.4 to 9.8 m2 per litre and recoat time is 2 hours. It glues down cracks and gaps under the edges of old paint, is flexible and breathable, works interior and exterior and cleans up with soap and water. The stated method is to remove loose paint, sand the edges, apply Peel Stop, let it dry, fill as usual, prime the filler and then allow the 2 hour recoat before the topcoat, which is the sequence that stops a repair showing through.

    Name this source
13. supplier figure RN-DHSYWT

    Zinsser UK

    Manufacturer data for a mould resistant interior matt paint. Coverage is 10 m2 per litre. Zinsser states the durable mould resistant film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance. It is self priming and will adhere to gloss or semi-gloss paints, existing wallcoverings, ceramic tile and similar glossy surfaces without prior sanding, but bare plaster must first be sealed with a primer such as Bulls Eye 1-2-3. Once dried the film is classed as a treated article containing the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one at 0.12 per cent by weight, which is the specific chemistry behind an anti-mould claim. It is water based, low odour and tintable to BS, RAL or NCS colours through the appropriate tint base.

    Name this source